FRP GRATING FIXING CLIPS

Stainless steel "M" Clips:

M clips are designed to clamp two of the FRP grating load bars to the supporting member.  This provides excellent holding capacity as it restrains movement in both directions. "M" clips are available for both Standard and Minimesh grating.

Stainless steel "C" Clips

C Clips are designed to hold two grating panels together to minimise differential deflections when their joints fall between supports.  The low nut is secured to the bottom of the clips so these can be installed from the top side of the grating.  C Clips are available for standard mesh grating only and are designed for 25mm and 38mm thick FRP grating.

"M" Clips
"C" Clips

*the Recommended Minimum Support for FRP grating is 40 mm.